Litter Robot Troubleshooting: Fixing Common Litter-Robot 3 Issues - Floppycats™ (2024)

ByJenny Dean

Share on X (Twitter)Share on FacebookShare on PinterestShare on Email <use href="#<svg width="1em" height="1em" viewBox="0 0 32 32" class="scriptlesssocialsharing__icon flipboard" fill="currentcolor" aria-hidden="true" focusable="false" role="img"><title>flipboard</title><path d="M24.997 13.001h-5.998v5.998h-5.998v5.998h-5.998v-17.995h17.995zM1.004 1.004v29.991h29.991v-29.991z"></path></svg>" xlink:href="#flipboard"> Share on Flip it

The Litter-Robot 3 is an excellent device for all cat owners who want to forever say goodbye to scooping litter. This device is designed to let you live in an odorless home, despite having cats while using less litter than you would typically use. Its beauty is that it takes care of the entire litter scooping process by following precise pre-programmed instructions that allow proper functioning at all times.

Litter Robot Troubleshooting: Fixing Common Litter-Robot 3 Issues - Floppycats™ (1)

However, like most devices, the Litter-Robot 3 will also encounter a few issues that may impede it from fulfilling its purpose. To this end, it’s essential to know the most common ones ahead of time, so you can quickly resume living in a pleasant home environment with satisfied cats.

These issues are easily fixable, and it’s essential to become familiar with the steps needed to fix them to be prepared at all times. Let’s look at some of the most common Litter-Robot 3 issues:

This website uses affiliate links that earn a commission at no additional cost. As an Amazon Associate, I earn from qualifying purchases.

1. Cat Sensor Troubleshooting

The Cat Sensor is a feature that senses when the cat has entered or exited the globe. If the cat sensor breaks down, no other normal function can occur. Having said this, you will need to follow a few simple steps to troubleshoot this issue.

  • First, you will need to press the Cycle button, which makes the unit cycle, and return to its Home position – indicated by the solid blue light.
  • Then press the Reset button, enabling you to adjust the cat sensor.
  • After this, press the globe’s top just above the entrance. You can do so in a backward and forward motion to see if the red light engages.
  • If it doesn’t, check how your unit was placed. To this end, ensure nothing is resting on your unit and that it’s not placed against a wall. It also needs to be placed on a solid, level surface.

What Happens if the Litter Robot Globe Jams?

If the Litter-Robot globe jams, the motor will stop and reverse for a few seconds. The unit will then try to cycle again three times. If it cannot cycle after three attempts, the globe will return to the home position, and the control panel will flash yellow and red or blue and red lights.

There are a few things you can do to troubleshoot a jammed Litter-Robot globe:

1. Turn off the unit and unplug it.
2. Remove the bonnet.
3. Remove the globe.
4. Inspect the globe for any debris that might be stuck on the outside.
5. Check the inside of the globe for any debris that might be stuck on the sifting mechanism.
6. Make sure that the waste drawer is empty and properly inserted.
7. Reassemble the unit and plug it back in.
8. Turn on the unit.

If the globe is still jammed, you can contact Litter-Robot customer support for help.

Here are some additional tips to prevent your Litter-Robot globe from jamming:

Use a high-quality, clumping litter.
Don’t overfill the globe.
Clean the globe and waste drawer regularly.
Check the sensors and gears for any blockages.

Here’s how to troubleshoot your jammed globe:

  • To reset the unit and have everything functioning correctly again, you will first need to remove the bonnet and put it aside.
  • You will also need to remove the globe, paying attention not to let it roll. What you need to do next is to inspect if there’s any liquid accumulation or residue right where the globe usually rests, with specific attention to its top portion from the exterior.
  • Be sure to check for excessive litter and remove it if the case calls for it. You will need to ensure there’s a maximum of 10 pounds of litter or fill it to the line.
  • Once you’re done, put the globe and bonnet back in place, ensuring all four tabs are in place also. Lock the black key on the back of the globe into the pocket.
  • Plug in the power supply and turn the unit back on. Your Litter-Robot will perform a cycle and return to its Home position with the blue light on.
Litter Robot Troubleshooting: Fixing Common Litter-Robot 3 Issues - Floppycats™ (2)
Litter Robot Troubleshooting: Fixing Common Litter-Robot 3 Issues - Floppycats™ (3)

3. Fixing a Loose Gear on Your Litter-Robot

Your unit may also have a loose or free spinning gear and no globe movement. In this case, it appears that the set screw has come loose, and you will need a 3mm hex wrench to fix it.

  • First, you will need to unplug the unit, remove the globe, and press on the black gear located on the side. If it moves, you can continue the steps.
  • You will need to locate the shaft attached to the gear – that’s where you can also find the screw, and if you can see it straight away, you can skip directly to using the wrench.
  • If you don’t see it, you can turn on the power and watch for the flat side to rotate into the position that allows you to see the set screw. The flat side of the shaft should be facing you.
  • Once aligned, turn off the power and unplug your Litter-Robot.
  • Using your 3mm hex wrench, tighten the screw by turning it to the right.
  • When it’s tight enough and no longer moves, you can place the globe back on the base, turn on the power, and press Cycle. When you see the blue light again, you’ll know everything is back to normal.

4. Bonnet Connections

If the bonnet is not securely placed on, the globe won’t rotate, and the yellow light blinks. An alternative cause of a faulty bonnet connection may be that the black key on the back of the globe is not in the slot, and it’s lifting the bonnet.

If, however, the key is in place and the bonnet correctly assembled, yet the yellow light is flashing still, you may need to:

  • Disconnect the bonnet.
  • Flex the two bonnet tabs outwardly.
  • Reattach the bonnet – you will know it’s securely in place when you feel a snap and hear a ‘click.’
  • While the bonnet is removed, you can also use a damp cloth to clean the two metal sensors on the left side of the bonnet.
  • Check the nightlight connection if you’re still encountering the issue. There are wires on the underside of the bonnet and in a micro connector. This, in turn, plugs into the circuit board inside the night light housing. All you need to do is push this micro connector into the circuit board to ensure proper connection.
  • The fin of the globe may also catch some of the bonnet wires, leading to the pause of the rotation.
  • It’s also recommended to check if there are any loose or pulled wires and secure them by taping them flat against the bonnet.
Litter Robot Troubleshooting: Fixing Common Litter-Robot 3 Issues - Floppycats™ (4)

Related Reading:

  • Should You Buy a Litter-Robot Refurbished and Reconditioned? Pros and Cons!
  • Toxic Air Fresheners
  • 50 Best Cat Lover Gifts

5. Blue Light Blinking

Regarding issues with your Litter-Robot 3, you may also see the blue light blinking. Before troubleshooting, it’s advisable to:

  • Unplug your power supply and then wait for 10 seconds.
  • Plug the unit back in and allow it to complete its cleaning cycle.
  • If the light is solid blue, everything has reverted to normal.

If the light is still blinking, you will need to troubleshoot. However, before you continue, you need to ensure the waste drawer is empty and has a clean liner.

Blue blinking light: The bag isn’t fully inserted in the drawer

A blue blinking light, but the bag is inserted correctly: The DFI lens is usually dirty; wipe them with a cloth.

First of all, you will need to check your DFI lenses for any obstructions:

  • Turn off your Litter-Robot and unplug from the power base, after which you can remove the bonnet and globe.
  • Look for excess litter and clean accordingly where the globe usually rests.
  • Look for the green circuit board within the waste port of the base.
  • Use a Q-tip to clean the sensor eye gently.
  • Replace the globe and bonnet while ensuring the black key from the back of the globe is secure in its slot.
  • Plug your unit back in, power it on, and press Cycle. After completing the cleaning cycle, the unit should return to its Home position with a solid blue light on.

If the issue persists, you will need to troubleshoot further:

  • Remove the waste drawer and press the Cycle button.
  • Press Reset twice to abort the cycle and return to the Home position.
  • While removing the waste drawer, make sure there isn’t anything in the drawer that may be blocking the sensor – in which case you would see a solid blue light.
  • If the drawer is clear, it’s time to call Customer Service since the base needs repairing.

6. All Three Lights Blinking

You will find that with your Litter-Robot, you may encounter another technical issue that manifests itself through all three lights blinking. (Read our whole post dedicated to this.) Now, there can be three different reasons why this may be happening, so let’s take a look at each one of them:

  • There’s excess weight in the unit. Check the litter level and ensure it’s not above the Fill line. If you take some litter from the globe, hit the Restart button afterward. Another way to remove excess weight is to empty the waste drawer, especially if it’s getting close to full.
  • Check your power supply. First, ensure there is no damage to the power cord and check that your adapter meets the specifications: 15VDC regulated adapter 400mA to 1000mA. If you’ve plugged your unit into an extension cord, try switching to a wall socket and see if there’s any difference.
  • Check the internal shield or black key at the back of the globe. As a note, all Litter-Robots purchased after February 21st, 2018, will not have an internal shield but, instead, the black key. When not set correctly, either one of them can cause disruptions to the cycling process. When the unit is in the Home position, the shield should be in the top left corner, and the key should be placed appropriately in the groove in the base.
  • Check the bonnet. It may need to be placed correctly. Ensure that each of the four tabs is appropriately secured, two curved in the back and two on the sides. You should hear a ‘click’ when that happens.
  • If you notice the globe lifting during the cycle process, it may be because it’s encountering resistance. This means there will be friction between the plastic of the globe and the base, causing the magnets in the globe to skip the position sensor, further leading to the 3 blinking lights. A simple solution is to apply furniture polish to the globe’s tracks. Each time you make changes to the unit, remember to press Reset.

[adthrive-in-post-video-player video-id=”FHXne83E” upload-date=”2022-11-01T04:40:45.000Z” name=”Litter Robot Open Air Self Cleaning Litter Box Review – Should You Get It.mp4″ description=”null” player-type=”default” override-embed=”default”]

7. The Fresh Restart

If no other troubleshooting method works, it’s best to try the Fresh Restart technique, as suggested by the team at Litter-Robot. This should enable you to identify and further communicate the issue to the Customer Service team. Here’s what you need to do:

  • First, press the Power button and turn the Litter-Robot off, then unplug the power supply from the back of the base.
  • Disassemble the bonnet and globe by depressing the side tabs, tilting the bonnet backward, then lifting it up and setting it aside.
  • While in the Home position, also carefully remove the globe.
  • Ensure the base is on firm, level ground and not pushed against the wall. The Litter-Robot must not be leaning on anything.
  • Empty the waste drawer even though it may not be full.
  • Reassemble the Globe back in the Home position. If you sense its weight may be imbalanced, gaze into the litter pocket through the screen. Check for any stuck litter, which may throw off the unit during cycling. Clean the Globe accordingly.
  • Once you align it on track, ensure the litter level inside the globe is at or below the raised Fill line.
  • Reassemble the bonnet by aligning the rear tabs in the base. Tilt the bonnet forward and snap the tabs into place, ensuring they are secured.
  • You will also need to ensure the black key at the back of the base is properly secured in its pocket.
  • Plug the power supply back into the base and turn the unit on.
  • Your Litter-Robot should now perform a cleaning cycle. It will rotate to the dump position, past the Home position to level the litter inside, and then back to the Home position again, with a solid blue light. It’s important to note that the Cat Sensor is automatically reset at the end of each cycle performed.
  • To manually activate the Cat Sensor, press the globe just above the entrance using a forward-backward motion and then release. This should activate the Cat Sensor. You will see the blue light going off and the red one going on instead – as a simulation of a cat entering and exiting the unit. Allow the unit the wait time you’ve set it to, regardless if it’s 3, 7, or 15 minutes, and the clean cycle to finish. If the globe returns to the Home position with a solid blue light, your Litter-Robot is functioning correctly.

8. Litter-Robot Turning the Wrong Way

Another issue with your Litter-Robot 3 may be that it can turn the wrong way from what it’s supposed to. Suppose you’re confronted with your Litter-Robot turning the wrong way. In that case, it’s usually due to one of the following two reasons:

  • The issue may be caused by malfunctioning the circuit board, which may need replacing. It’s recommended that you talk to the Litter-Robot support team about this.
  • The issue may be caused by the harness/magnetic sensor. It may be slowly giving out, so once again, you will need to talk to the Litter-Robot support team and see if you need to replace it.

9. Litter-Robot Hall Effect Sensor

The Hall Effect Sensor is an integral part of the Litter-Robot, and the core technology makes it such an intelligent machine.

  • The Hall Effect Sensor is part of the Wiring Harness and is only sold together with it.
  • We’ve talked before about the three lights blinking. Suppose you’ve checked the voltage of the power supply and the set screw on the motor, and the issue persists. In that case, it comes down to the Hall Effect Sensor, which may need replacing.

If you find yourself in need of replacing the Wiring Harness system, rest assured it’s an easy process as long as you follow these steps:

1. Opening the Control Panel

  • Make sure that, first of all, you cut off all power from your Litter-Robot by unplugging the machine.
  • Remove the Bonnet, Globe, and Waste Drawer.
  • On the top of the base, called the bezel, you will find five screws – unscrew them to remove the top.

2. Look For the Circuit Board and Sensors

  • Lift the bezel by using needle-nose pliers.
  • You will now see the Hall Effect Sensors, the circuit board, and the motor.
  • You’ll find 3 connectors on the motherboard – gently unplug them.
  • The motor will also have 2 connectors – unplug them and then remove the motor.
  • You may find tape holding the Circuit Board and Keypad in place – remove it without second thoughts.
  • Find and remove the wire locker.

3. Opening the Base

  • The next step is to turn the base upside down while ensuring the control panel has no loose parts inside.
  • You’ll find 9 screws here – remove them.

4. Removing the Entire Harness

Before you go through this process, make sure you take a mental note of how the wiring on the Litter-Robot was made. Better yet, take a photo of the entire electrical arrangement so you’ll have something to turn to when you assemble back the machine.

  • Use the pliers from before and carefully remove the Power Jack.
  • The blue and black wires represent the Cat Sensor’s connector – unplug them.
  • The purple and black wires represent the Bonnet’s wires – unplug them.
  • The red and black wires represent the Battery wires – gently remove them.

5. Installing the New Wiring Harness

  • Plug back in the blue and black wires representing the Cat Sensors.
  • Pass the red and black wires, representing the battery wires in the small hole.
  • Plug back in the white and black wires representing the Power Jack Connector.
  • Plug back in the purple and black wires representing the Bonnet’s connectors.
  • Pass the Hall Effect Sensor through the Control Panel hole.

6. Installing Back the Control Panel

  • Ensure that all wires go under the Motor.
  • Clip back the Wire Locker.
  • Install the motor and pay attention to the wiring: red with green and white with brown.
  • Install the plastic piece with the Hall Effect Sensor in place.
  • Secure the Hall Effect Sensor by adding a piece of tape.
  • Plug back those 3 initial connectors on the Circuit Board.

7. Closing the Unit Back

  • Clip back the main board on the plastic panel.
  • Screw back all the initial 5 screws while ensuring all the wires are plugged in securely.
  • Screw back the 9 screws on the back of the base from earlier on.

8. Plug It Back It and Give It a Run

  • Once you’ve reassembled the unit, make sure you also install the Globe.
  • Clip the Bonnet back.
  • Plug the power supply back in.
  • If it doesn’t power up automatically, press the Power Button.
  • Let the unit cycle and follow its program.
  • Enjoy your Litter-Robot.

10. Litter-Robot Won’t Cycle Automatically

Suppose you notice your Litter-Robot won’t cycle automatically, and the yellow light won’t turn off. In that case, it’s most likely because it entered Sleep Mode. This mode has been created for you to have some peace and quiet for eight hours, especially if the Litter-Robot is placed somewhere where, at times, you require no disturbance.

Once you set the Sleep Mode on, it will not cycle automatically for 8 hours straight. However, once these 8 hours are done, a Clean Cycle will begin. Press and hold the Cycle button to exit the Sleep Mode until the yellow light turns off.

11. Litter-Robot Won’t Cycle Automatically, Doesn’t Detect the Cat

The Litter-Robot Cat Sensor is created for the Litter-Robot to know when the cat enters and exits the unit. Every time the unit is turned on, the Cat Sensor measures the weight of the unit and detects if there are any changes to it.

[adthrive-in-post-video-player video-id=”bftD7Xue” upload-date=”2022-11-01T04:46:35.000Z” name=”Litter Robot 3 – LR3 – Weight Sensor Timer” description=”This Whisker Litter Robot 3 video addresses the weight sensor timer.” player-type=”default” override-embed=”default”]

Pressing the Reset Button every time you change the weight of the Litter-Robot will enable it to understand that something has changed. It’s recommended that you press the Reset Button in any of these cases:

  • You’ve emptied the Waste Drawer;
  • You’ve added litter;
  • You’ve cleaned the unit;
  • You’ve moved the Litter-Robot.

Once you press the Reset Button, the blue light will flash, and the Cat Sensor will be reset and reactivated.

The Cat Sensor’s normal functioning may be affected whenever you:

  • Place the Litter-Robot on an uneven surface, against the wall or on the carpet;
  • You haven’t filled the Litter-Robot with enough litter to meet the raised Fill Line;
  • Your cat weighs less than 5 lbs;

When the Litter-Robot doesn’t detect your cat, perform these quick checks:

  • Look at the display on your unit. If both the blue and yellow lights are on, the unit is in Sleep Mode.
  • If you notice a dirty litter box and the light doesn’t change from blue to red when the cat is inside, then the Cat Sensor didn’t correctly detect your cat. Test this by pressing the Cycle button, so the unit can perform a Clean Cycle. Afterward, it should simply return to the Home position with a solid blue light on, indicating that everything is running normally. You can then press the Reset button, which will make the blue light blink and which confirm the Cat Sensor has been reset.
  • You can then test the Cat Sensor by pressing back and away on top of the entry unit towards the back of the unit. The blue light should turn red as if the unit registered your cat is inside. If it does, it’s a great sign. Press the Reset button, and the unit will return to its blue standby light. If the light did not turn red, your Cat Sensor did not feel the pressure you applied, so you’ll need to perform a Hard Reset.
  • To perform a Hard Reset, ensure the globe is in the Home position, and there’s a solid blue light on. Remove the power supply from the back and wait 10 seconds, after which you can plug it back in. You can now allow the unit to complete a Clean Cycle, then press and hold the Cycle button for 5 seconds. Both the blue and yellow lights will turn on – now press and hold the Cycle button for 5 seconds. This will turn the yellow light off while the blue light remains on. You can now activate the Cat Sensor by pressing down and away on the unit entryway towards the back. The red light should come on now – if it does, it’s a great sign. Allow the unit to finish its Clean Cycle. Once in the Home position again, the unit will be reset. If the red light did not turn on, it’s recommended that you contact Customer Service.

12. Litter-Robot Gets ‘Stuck.’

It can also happen occasionally when your Litter-Robot gets ‘stuck.’ In case this happens, one of the following scenarios may apply:

  • There may be too much litter in the Globe;
  • The type/brand of litter is heavier than the average litter. In this case, you can put a little less than you would typically do with regular litter – fill in just below the Fill Line. If your litter is regular, put in just enough so it’s below the raised Fill line or reaching this level.

13. Litter-Robot Is Dumping Clean Litter

In case this happens, you should know that most likely there’s too much litter in the globe. So scoop some out, and when you fill in the unit the next time, ensure the litter level is at or below the raised Fill Line.

14. The Waste Inside the Litter-Robot Sticks

If you observe the waste sticking, you can adjust the Litter-Robot Wait Time setting to accommodate your litter – you can do so by decreasing or increasing it.

The Wait Time is the elapsed time between the moment your cat exits the globe and the unit starts a Clean Cycle. It can be set for 3, 7, or 15 minutes, although the default Wait Time is 7 minutes.

When you reduce the Wait Time:

  • You’ll have the chance to reduce unpleasant odors;
  • Or reduce the time that litter is available to other pets as well;
  • You may also reduce cleaning effectiveness if the litter lacks enough time to clump.

On the other hand, you can also extend the Wait Time when you’re using lower-quality litter that needs more time to clump up;

To set up the Wait Time:

  • Press and hold the Empty button for about 5 seconds. One of the lights will start flashing, indicating the current setting for the Wait Time.
  • Use the Reset Button to switch to the following setting: blue for 3 minutes, yellow for 7 minutes, and red for 15 minutes.
  • Press and hold the Empty button to save the setting you selected. The blue light will blink to confirm your choice, then return to its solid standby position.

All in all, these are the most common issues you can encounter when owning the Litter-Robot 3. Of course, they may or may not occur. Still, by knowing these steps mentioned above, you’ll be able to successfully get out of any unpleasant situation that may arise.

Jenny Dean

|Website

Hi, I’m Jenny Dean, creator of Floppycats! Ever since my Aunt got the first Ragdoll cat in our family, I have loved the breed. Inspired by my childhood Ragdoll cat, Rags, I created Floppycats to connect, share and inspire other Ragdoll cat lovers around the world,

Share on X (Twitter)Share on FacebookShare on PinterestShare on Email <use href="#<svg width="1em" height="1em" viewBox="0 0 32 32" class="scriptlesssocialsharing__icon flipboard" fill="currentcolor" aria-hidden="true" focusable="false" role="img"><title>flipboard</title><path d="M24.997 13.001h-5.998v5.998h-5.998v5.998h-5.998v-17.995h17.995zM1.004 1.004v29.991h29.991v-29.991z"></path></svg>" xlink:href="#flipboard"> Share on Flip it
Litter Robot Troubleshooting: Fixing Common Litter-Robot 3 Issues - Floppycats™ (2024)

FAQs

How to clean Litter-Robot cat sensor? ›

With the globe, bonnet, and drawer removed, lean the unit backward so that you can look into the holes on the bezel to see each sensor. Using a clean, dry cotton swab, carefully clean the surface of each sensor to remove any dust.

Why does my Litter-Robot keep having a cat sensor fault? ›

Check for obstructions

Make sure Litter-Robot is on a firm, level surface. The cat sensor function can be affected if the unit is on carpeting or a litter mat. Check that there are no power cords running underneath the base of the robot that might obstruct movement.

How do you fix a cat Litter-Robot? ›

Litter-Robot 3 Troubleshooting: Fresh Restart
  1. Step 1: Power Down. ...
  2. Step 2: Disassemble the Bonnet and Globe. ...
  3. Step 3: Situate the Base. ...
  4. Step 4: Reassemble the Globe. ...
  5. Step 5: Reassemble the Bonnet and Position the Internal Shield & Key. ...
  6. Step 6: Double Check. ...
  7. Step 7: Power Up. ...
  8. Step 8: Automatic Reset.
Oct 18, 2016

Can I hose down my Litter-Robot? ›

There are no electronics in the globe or waste drawer, so you can soak these in a tub or hose them down. This will help prevent litter streaking. We recommend using a soft toilet brush to easily access the inside of the globe.

Why does my Litter-Robot keep stopping mid cycle? ›

If a cycle is interrupted or the bonnet is removed, the unit will stop, and the yellow light will flash slowly, about 1x per second. This will also occur if the cat sensor is activated by a cat entering the globe. The unit will resume its cycle 15 seconds after your cat has left the globe.

When should I reset my Litter-Robot? ›

IMPORTANT: Any time you do anything that affects the weight or placement of the unit, including adding or removing litter, emptying the waste drawer, or moving or cleaning the unit, press the Reset button once you are done.

How to force Litter-Robot 3 to cycle? ›

Press and release the Cycle button to start a clean cycle. If already cycling, press Cycle to pause; press again to resume a cycle. Press and hold, while at the home position, to enter sleep mode. Press and release the Empty button to start an empty cycle (empties all litter into the waste drawer).

Why is my Litter-Robot not sensing my cat's weight? ›

If your Litter-Robot 4 is not accurately detecting your cat's weight, this is typically an issue with the placement of your robot. The cat sensor weight scale may also record a partial measurement when a curious kitty puts weight on the step without completely entering the unit.

Why is my robot litter box not detecting my cat? ›

Inspect the litter and waste drawer

Check for excess litter inside the globe. Using more than 10 lbs (4.5 kg) of litter can trigger the cat sensor, causing your cat to not be detected. Make sure the litter is at or below the raised fill line. Some brands of litter are heavier than others.

How to do a hard reset on Litter-Robot 3 reddit? ›

Please follow these steps or use our guided troubleshooter to resolve this issue.
  1. Empty the Litter-Robot waste drawer.
  2. Ensure the waste drawer liner is properly installed and tucked into all 4 tabs.
  3. Perform a hard reset after emptying the waste drawer: Unplug Litter-Robot for 10 seconds and replug.
Feb 8, 2023

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Van Hayes

Last Updated:

Views: 5637

Rating: 4.6 / 5 (46 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Van Hayes

Birthday: 1994-06-07

Address: 2004 Kling Rapid, New Destiny, MT 64658-2367

Phone: +512425013758

Job: National Farming Director

Hobby: Reading, Polo, Genealogy, amateur radio, Scouting, Stand-up comedy, Cryptography

Introduction: My name is Van Hayes, I am a thankful, friendly, smiling, calm, powerful, fine, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.